SKF thrust ball bearing

SKF thrust ball bearing is a separable bearing, the shaft washer and seat washer can be separated from the cage and steel ball components. The shaft ring is a ring that matches the shaft, and the seat ring is a ring that matches the bearing seat hole, and there is a gap between the shaft and the shaft; the thrust ball bearing can only bear the axial load, and the one-way thrust ball bearing can only bear the axial load. Axial load in one direction, two-way thrust ball bearings can withstand axial loads in two directions; thrust ball bearings cannot limit the radial displacement of the shaft, and the limit speed is very low, and one-way thrust ball bearings can limit one of the shaft and the shell. Axial displacement in two directions, bidirectional bearings can limit the axial displacement in both directions.

SKF one-way thrust ball bearings
SKF one-way thrust ball bearings consist of a shaft washer, a seat washer and a steel ball-cage assembly. This type of SKF bearing is a separate type, and the shaft washer, seat washer, and ball-cage assembly can be installed separately.

There are two types of small bearings, with flat seat ring or with self-aligning seat ring. Bearings with self-aligning seat washers can be used with self-aligning seat washers to compensate for angular misalignment between the support surface in the housing and the shaft.

SKF's one-way thrust ball bearings can bear axial load in one direction and can be used for axial positioning in one direction, but must not bear any radial load.

SKF double direction thrust ball bearings
SKF double direction thrust ball bearings include a shaft washer, two seat washers and two steel ball-cage assemblies. The bearing is a separate type, and each part can be installed independently. Two-way bearings and one-way bearings use the same shaft washer, seat washer and steel ball-cage assembly.

SKF's two-way thrust ball bearings can withstand two-way axial loads and perform two-way axial positioning, and must not bear any radial loads.

SKF thrust ball bearings are mainly used in automobile, machine tool and other industries.