FAG angular contact ball bearing

FAG angular contact ball bearings can bear both radial and axial loads. Can work at higher speeds. The larger the contact angle, the higher the axial load carrying capacity. High-precision and high-speed bearings typically have a 15-degree contact angle. Under the action of axial force, the contact angle will increase. Single row angular contact ball bearings can only bear the axial load in one direction, and will cause additional axial force when bearing radial load. And can only limit the axial displacement of the shaft or housing in one direction. If it is installed in pairs, make the outer rings of a pair of bearings face each other, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. In this way, additional axial forces are avoided and the shaft or housing is limited to the axial play in both directions.

FAG angular contact ball bearings can bear radial load and axial load at the same time because the raceways of the inner and outer rings can have relative displacement on the horizontal axis - combined load (single row angular contact ball bearing can only bear axial load in one direction , so they are usually installed in pairs)

FAG Angular Contact Ball Bearing Cage
The material of the cage is brass, synthetic resin, etc., which are distinguished according to the bearing type and usage conditions.