FAG deep groove ball bearing

FAG deep groove ball bearing basic type
The basic types of FAG deep groove ball bearings are open type, double-sided with sealing ring or double-sided with dust cover. In the need of production, the sealed bearing has a groove on the outer ring that can be installed with a sealing ring or a dust cover. grooves, also available as open bearings.

FAG deep groove ball bearing tolerances
The basic type of single row deep groove ball bearings have normal tolerances. Bearings with tighter manufacturing tolerances can also be provided as long as the user requires.

FAG deep groove ball bearing bearing clearance
Basic types of single row deep groove ball bearings use a basic clearance set. Bearings with larger clearances are available on request.

FAG deep groove ball bearing cage
Basic types of deep groove ball bearings without cage suffixes in the designation are fitted with stamped steel cages. Deep groove ball bearings with the suffix M in the designation have a solid brass cage guided by steel balls.

FAG deep groove ball bearing alignment
Due to the limited self-aligning ability of deep groove ball bearings, the concentricity of the bearing installation seat is required to be good. Poor concentricity will affect the smoothness of operation and increase the stress of the bearing, thereby shortening the service life of the bearing. In order to keep the additional stress on the bearing within the allowable range, deep groove ball bearings can only allow a small deflection angle, which also depends on the size of the load.